Search results

|description=The '''gain''' is an amplification factor applied to an input signal to increase the ou == Gain: O2 channel of the O2k ==

...t</span style> button is clicked in the <span style="background:lightgrey">O2 calibration</span style> window: ...ar to be zero. The raw signal can be modified by choosing an appropriate [[Gain]] setting.

...odules |O2k signal]]: The [[O2k-pH ISE-Module]] is operated through the pX channel of the O2k, with electric potential (volt [V]) as the primary and raw signa ::::* '''Response pegs off-scale:''' (i) Check the pX gain setting. (ii) Visually inspect the electrode for a broken bulb.

...ules |O2k signal]]: The [[O2k-TPP+ ISE-Module]] is operated through the pX channel of the O2k, with electric potential (volt [V]) as the primary and raw signa ::::# Due to the high O2 flux frequent reoxygenations are required.

...e recommend running experiments in MiR05 with a sensitivity >0.5 and <3 at gain 1000 and fluorescence intensity lower than 500 . If the sensitivity is out :::::: a. Go to [Layout] menu and click into ‘O2&Amp´ and select `Standard Layouts/01 Amp Amperometric_Raw signal´.

|''' Barometric pressure displaying as 0 kPa in the O2 calibration window? '''<br> |''' Can I compare data sets recorded with different sensor gain settings? '''<br>