|
|
Line 1: |
Line 1: |
| {{MitoPedia
| |
| |abbr=n.a.
| |
| |description='''Protocols''' can be selected in DatLab (DL7.1) which define the sequence of [[Events in DatLab |events] and [[Marks in DatLab |marks]]. Instrumental protocols are used for calibrations and instrumental quality control, typically without experimental smaple in the incubation medium. [[Substrate-uncoupler-inhibitor titration]] protocols (see [[MitoPedia: SUIT]]) proceed stepwise to activate a sequence of [[coupling control state]]s and [[pathway control state]]s. A specific SUIT protocol can be assigned to O2k-chamber A or B or both. The Titration-Injection-microPump [[TIP2k]] can be programmed to control automatically TIP2k-protocols. Standard protocols are provided. These can be edited and saved under 'Lab protocols' or under the User logged into DatLab.
| |
| }}
| |
| {{MitoPedia O2k and high-resolution respirometry
| |
| |mitopedia O2k and high-resolution respirometry=DatLab
| |
| }}
| |
| == Protocol editor ==
| |
| :::: The sequence of Events and Marks can be edited with names, definitions, concentrations and titration volumes. After a protocol is edited and saved under a defined name, the protocol has to be selected and assigned to one or both O2k-chambers.
| |
|
| |
|
| :::: A. Instrumental protocols: calibration and instrumental O2 background test
| |
| :::: B. SUIT protocols: linked to titration solutions
| |
| :::: C. TIP2k-protocols.
| |
|
| |
|
| |
| == Protocol driver ==
| |
| :::: After selecting a protocol, the Protocol driver indicates for the selected O2k-chamber, which [[Events in DatLab |events]] and [[Marks in DatLab |marks]] have been set (green), and which event is to be set next, with the corresponding mark.
| |