Difference between revisions of "Polarization voltage"

Revision as of 13:19, 5 April 2018

high-resolution terminology - matching measurements at high-resolution

Polarization voltage

Description

A polarization voltage of 600 mV to 800 mV is applied between anode and cathode of the polarographic oxygen sensor, resulting in a current when oxygen is consumed. The current is converted by the electronics to a voltage (raw signal) which must not be confused with the polarization voltage.

Abbreviation: U

Reference: MiPNet22.11 O2k-FluoRespirometer manual

MitoPedia O2k and high-resolution respirometry: O2k hardware, DatLab

DatLab

The polarization voltage is set in DatLab in the O2k control window [F7] (MiPNet22.11 O2k-FluoRespirometer manual). The default value is 800 mV.

@@ Line 2: / Line 2: @@
 |abbr=''U''
 |description=A '''polarization voltage''' of 600 mV to 800 mV is applied between anode and cathode of the [[polarographic oxygen sensor]], resulting in a current when oxygen is consumed. The current is converted by the electronics to a voltage (raw signal) which must not be confused with the polarization voltage.
-|info=[[MiPNet19.18A O2k-Series G: Start]]
+|info=[[MiPNet22.11 O2k-FluoRespirometer manual]]
 }}
 {{MitoPedia O2k and high-resolution respirometry
@@ Line 8: / Line 8: @@
 }}
 == DatLab ==
-:::: The polarization voltage is set in [[DatLab]] in the [[O2k control]] window [F7] ([[MiPNet19.18A O2k-Series G: Start]]). The default value is 800 mV.
+:::: The polarization voltage is set in [[DatLab]] in the [[O2k control]] window [F7] ([[MiPNet22.11 O2k-FluoRespirometer manual]]). The default value is 800 mV.
 [[Category:Technical service]]