Difference between revisions of "Polarization voltage"
From Bioblast
Line 8: | Line 8: | ||
}} | }} | ||
== DatLab == | == DatLab == | ||
The polarization voltage is set in [[DatLab]] in the [[O2k control]] window [F7] ([[MiPNet19.18A O2k-start]]). The default value is 800 mV. | :::: The polarization voltage is set in [[DatLab]] in the [[O2k control]] window [F7] ([[MiPNet19.18A O2k-start]]). The default value is 800 mV. | ||
Β | |||
[[Category:Technical service]] | [[Category:Technical service]] |
Revision as of 09:54, 9 October 2016
Description
A polarization voltage of 600 mV to 800 mV is applied between anode and cathode of the polarographic oxygen sensor, resulting in a current when oxygen is consumed. The current is converted by the electronics to a voltage (raw signal) which must not be confused with the polarization voltage.
Abbreviation: U
Reference: MiPNet19.18A O2k-start
MitoPedia O2k and high-resolution respirometry:
O2k hardware,
DatLab
DatLab
- The polarization voltage is set in DatLab in the O2k control window [F7] (MiPNet19.18A O2k-start). The default value is 800 mV.