Cookies help us deliver our services. By using our services, you agree to our use of cookies. More information

Difference between revisions of "Polarization voltage"

From Bioblast
Line 2: Line 2:
|abbr=''U''
|abbr=''U''
|description=A '''polarization voltage''' of 600 mV to 800 mV is applied between anode and cathode of the [[polarographic oxygen sensor]], resulting in a current when oxygen is consumed. The current is converted by the electronics to a voltage (raw signal) which must not be confused with the polarization voltage.
|description=A '''polarization voltage''' of 600 mV to 800 mV is applied between anode and cathode of the [[polarographic oxygen sensor]], resulting in a current when oxygen is consumed. The current is converted by the electronics to a voltage (raw signal) which must not be confused with the polarization voltage.
|info=[[MiPNet19.18A O2k-start]]
}}
}}
{{MitoPedia concepts}}
{{MitoPedia methods}}
{{MitoPedia O2k and high-resolution respirometry
{{MitoPedia O2k and high-resolution respirometry
|mitopedia O2k and high-resolution respirometry=O2k hardware, DatLab
|mitopedia O2k and high-resolution respirometry=O2k hardware, DatLab
}}
}}
{{MitoPedia topics}}
== DatLab ==
== DatLab ==
The polarization voltage is set in [[DatLab]] in the [[O2k control]] window [F7] ([[MiPNet19.18A O2k-start]]). The default value is 800 mV.
The polarization voltage is set in [[DatLab]] in the [[O2k control]] window [F7] ([[MiPNet19.18A O2k-start]]). The default value is 800 mV.

Revision as of 09:32, 14 August 2016


high-resolution terminology - matching measurements at high-resolution


Polarization voltage

Description

A polarization voltage of 600 mV to 800 mV is applied between anode and cathode of the polarographic oxygen sensor, resulting in a current when oxygen is consumed. The current is converted by the electronics to a voltage (raw signal) which must not be confused with the polarization voltage.

Abbreviation: U

Reference: MiPNet19.18A O2k-start





MitoPedia O2k and high-resolution respirometry: O2k hardware, DatLab 



DatLab

The polarization voltage is set in DatLab in the O2k control window [F7] (MiPNet19.18A O2k-start). The default value is 800 mV.