Park 2007 Sensors IEEE

From Bioblast
Jump to navigation Jump to search
Publications in the MiPMap
Park J, Chang J, Choi M, Pak JJ, Lee DY, Pak YK (2007) Microfabricated Clark-type sensor for measuring dissolved oxygen. Sensors IEEE: 1412-1415.

» IEEE

Park J, Chang J, Choi M, Pak JJ, Lee DY, Pak YK (2007) IEEE

Abstract: This paper presents a microfabricated Clark-type sensor which exactly can measure dissolved oxygen in the cell containing solution. We designed and fabricated a microfabricated Clark-type sensor for measuring the oxygen respiration level of few cells. The microfabricated Clark-type sensor is composed of 3-electrodes on a glass substrate, a FEP (Fluorinated ethylene propylene) oxygen-permeable membrane, and PDMS (Polydimethylsiloxane) reservoir for storing few cells containing solution. The microfabricated Clark-type sensor was fabricated using MEMS technology. Thin-film Ag/AgCl was employed as a reference electrode and its durability was verified by obtaining a stable open circuit potential versus a commercial Ag/AgCl electrode for 2 hours. Response time, reproducibility and linearity of the fabricated oxygen sensor were examined by amperometry. The fabricated Clark-type sensor showed 40 sec of 90% response time, reproducibility with 1.37 nA standard deviation of 97.03 nA mean in the full-oxygen state and 0.26 nA standard deviation of 3.25 nA mean in the zero-oxygen state, and an excellent linearity with a correlation coefficient of 0.994.


O2k-Network Lab: KR_Seoul_Pak YK


Labels: MiParea: Respiration, Instruments;methods 





HRR: Oxygraph-2k 

KR